Monday, December 12, 2011

Merry & Bright


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written December 12th, 2011

Supplies Needed
Tube with closeup
Scrap kit - Merry and Bright by Pimp'd Designs - you can buy HERE

Scrap Kit Supplies
pd-frame-03
pd-pp-12
pd-tree-01
pd-gift-01
pd-wa-01
pd-print-01

Lets Get started
Open a new 500 x 500 transparent image - open pd-frame-03 to 362 x 500 and paste on the new image - paste pd-pp-12 on your tag and move below the frame - past the close up tube on your tag and move below the frame but above the paper / arrange the face inside the frame - with your magic wand and the frame layer selected click the center of the frame / go back to the paper layer - selections / modify /expand by 3 / selections / invert and hit delete on the paper and tube layers

Paste the tube on your tag and move to the right side of your tag - (step is not needed if the tube legs that will be present) - duplicate the tube and move one below the frame layer - close off view of top tube and with your eraser tool and bottom tube layer selected erase the excess tube showing under the frame at the bottom of the frame - select and open view of the top tube and erase(how ever much you want) the parts of the tube on the frame - add a drop shadow to the top tube and erase the shadow that goes over the legs and other parts of the tube

Resize pd-tree-01 to 250 x 300 and paste on your tag - move to the left of your tag - resize pd-gift-01 to 150 x 128 and paste on your tag - move over the tree trunk under the tree - resize pd0-wa-01 to 450 x 105 and paste on your tag - move to the bottom of your tag - open pd-print-01 / image / free rotate by 90 degrees to the right - resize to 312 x 490 and paste on your tag - add a drop shadow to each of those elements

Add your name and copyright / and your done
thanks for trying my tut
Thursday, September 15, 2011

Witches N' Britches

Tuesday, September 13, 2011

Dreamer

This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written September 13th, 2011

Supplies Needed
Tube with closeup
Scrap kit - What Dreams May Come by Designs by Sarah - you can buy HERE

Scrap Kit Supplies

sb_pmt_WDMC_frame 3
sb_pmt_WDMC_girl
sb_pmt_WDMC_clouds
sb_pmt_WDMC_cloud1
sb_pmt_WDMC_sheep2
sb_pmt_WDMC_ribbon3
sb_pmt_WDMC_sparkles1
sb_pmt_WDMC_pp9

Lets Get Started
Open a new 500 x 500 transparent image - resize frame 3 to 600 x 600 and paste on your tag - paste pp9 on your tag and move below the frame - with the magic wand and frame layer selected click the center of the frame - selections / modify / expand by 5 - go back to the paper layer - selections / invert and hit delete on your keyboard - go back and add a drop shadow to the frame

Resize girl to 500 x 500 and paste on your tag - add a drop shadow - resize clouds to 400 x 265 and paste on your tag - move to the top left and add a drop shadow - and move below the girl - resize cloud1 to 400 x 258 and paste on your tag - move over the other clouds and add a curve to it - move below the girl and add a drop shadow with the opacity 30 or below - resize ribbon 3 to 500 x 197 and image / free rotate by 90 degrees to the left - paste on your tag - move to the bottom of the frame and add a drop shadow - resize sparkles1 to 500 x 471 and paste on your tag - resize sheep2 to 200 x 180 and paset on your tag - move to the bottom right and add a drop shadow 

Add your name and copyright and your done
Saturday, September 10, 2011

Punk-O-Ween


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written September 10th, 2011


Supplies Needed 
closeup tube 
Scrap kit - Punk-O-Ween - you can buy HERE
Scrap Kit Supplies 
sn_pmt_punkoween_word 
sn_pmt_punkoween_witch 
sn_pmt_punkoween_frame 3 
sn_pmt_punkoween_confetti 
sn_pmt_punkoween_candy9 
sn_pmt_punkoween_bat1 
sn_pmt_punkoween_pp5


Lets Get Started
 Open new 500 x 500 transparent image - resize frame 3 to 399 x 500 and paste on your tag - paste pp5 on your tag and move below the frame - with your magic wand and the frame layer selected click the center transparent part of the frame - go back to your paper - selections / modify / expand by 5 / selections / invert and hit delete on your keyboard - paste the closeup tube on your tag  and move below the frame - arrange to your liking - with your magic wand and the paper layer selected click outside of the frame - and hit delete on your keyboard - change the blend on the tube to overlay

Resize witch to 184 x 350 and paste on your tag - move to the bottom left the frame and add a drop shadow - resize bat1 to 300 x 113 and paste on your tag - move to the top right of your tag and turn it slightly - add a drop shadow - resize word to 300 x 163 and paste on your tag - move to the bottom of the frame and add a drop shadow - resize candy9 128 x 150 - image / mirror - move to the bottom right of the frame - move below the word art so some is under the K - add a drop shadow - resize confetti to 246 x 500 and paste on your tag - add a drop shadow

Add your name and copyright - and your done
Friday, September 9, 2011

CU Freebie Cute Lil Penguin

My first template
CU/PU full size
You can download HERE
Saturday, September 3, 2011

Haunted Halloween


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written September 3rd, 2011

Supplies Needed
tube of choice
Scrap kit - Haunted Halloween by Crystals Creations -  Find her blog HERE
You can buy the kit HERE


Scrap Kit Supplies
hh_ee12
hh_ee14
hh_ee32
hh_ee34
hh_ee38
hh_pp3

Lets Get Started
Open a new 500 x 500 transparent image - resize ee32 to 472 x 472 and paste on your tag - paste pp3 on your tag and move below the frame - change the magic wand to selections - selection type at circle and mode at add - find the center of the tag and draw a circle until the circle is on the frame - go back to the paper layer - selections / invert / and hit delete on your keyboard - paste ee38 on your tag and move below the frame and add a drop shadow

Paste the tube on your tag and move it to the left slightly - resize ee34 to 177 x 200 - image / mirror and paste on your tag - move to the bottom right of your tag and add a drop shadow - resize ee14 to 200 x 195 - images / flip and paste on your tag and move below the tube - move to the middle right and add a drop shadow and move below the tube - paste ee12 on your tag

Add your name and copyright and your done

Another tag with this scrap kit

Wednesday, August 31, 2011

EmoGirlz PDS



This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written august 127th, 2011

Supplies Needed
Tube with closeup
Scrap kit - Emo Girlz Rock by Tammy Kat - you can buy HERE

Scrap Kit Supplies
PDS_EGR-pin
PDS_EGR-frame1
PDS_EGR-halftone1
PDS_EGR-skull
PDS_EGR-paper7

Lets Get Started
Open a new 600 x 250 image - paste paper7 on the tag - arrange the closeup tube on the tag and duplicate it a few times to fill the background - merge the tube layers together and and change the blend to soft light - paste halftone1 on your tag and change the blend to overlay


Paste the regular(or closeup your choice) on your tag and arrange so the face shows on the tag - resize frame1 to 400 x 341 and paste on your tag - paste pin on your tag and move to the left of the frame - resize skull to 200 x 152 and paste on your tag - move to the right of your tag - add new raster - selections / select all / selections / modify / select selections borders use the settings: inside, anti-alias checked, border at 4 - flood fill with a dark color from your tube - adjust / add/remove noise / add noise and use settings of choice - do the same border but instead of 4 make it 6 and flood fill with white 


Avatar
Open a new 150 x 150 image - paste paper7 on your avatar - paste halftone1 on your tag and move to the right so that only the small dots show - change the blend to overlay - paste the tube on the avatar and move to the right - add new raster - selections / select all / selections / modify / select selection borders / use the same settings as before the change the border to 2 and flood fill with the same dark color as the banner and add noise - redo the border and change the border to 4 and flood fill with white


Add your name and copyright and your done
Saturday, August 27, 2011

EmoGirlz TK

 
This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written august 127th, 2011

Supplies Needed
Closeup tube
Scrap kit - Emo Girlz Rock by Tammy Kat - you can buy HERE

Scrap Kit Supplies
tk-emogirlz-chromeframe
tk-emogirlz-checkedpaper3
tk-emogirlz-background1
tk-emogirlz-skullbow-purple
tk-emogirlz-heartstitches2
tk-emogirlz-emowordart

Lets Get Started
Open a new 500 x 500 transparent image - resize chromeframe to 450 x 442 and paste on your tag - paste checkedpaper3 on your tag and move below the frame - with your magic wand and frame layer selected click the center of the frame - selections / modify / expand by 4 / selections / invert - go back to the paper layer and hit delete on your keyboard - paste the closeup tube on your tag and move below the frame - with your magic wand and frame layer selected click the center of the frame - selections / modify / expand by 4 / selections / invert - go back to the tube layer and hit delete on your keyboard - change the blend to soft light

Paste background 1 on your tag and move it below the frame and paper - paste the regular sized tube on your tag and leave it centered - resize skullbow-purple 118 x 150 and paste on your tag - move to the left and add a drop shadow - resize heartstitches2 to 200 x 186 and paste on your tag - move to the top right and move it below the tube and add a drop shadow - resize emowordart to 300 x 157 and paste on your tag - move to the bottom and add a drop shadow

Add your name and copyright and your done
Wednesday, August 24, 2011

Skull Candy

This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written august 24th, 2011

Supplies Needed
Closeup tube
Scrap kit - Skull Candy by Crystals Creations -  Find her blog HERE
You can buy the kit HERE
Seperate Frame made by me which you can download HERE


Scrap Kit Supplies
Skull_Candy_pp6
Skull_Candy_ee39
Skull_Candy_ee38
Skull_Candy_ee3
Skull_Candy_ee29
Skull_Candy_ee20
Lets Get Started
Open a new 500 x 500 image - paste Skull Candy Frame(found in my supplies) on your tag - paste pp6 on your tag and move below the frame - with your magic wand and the frame layer selected click the center of the frame - selections / modify / expand by 4 / selections / invert - go back to the paper layer and hit delete on your keyboard

Paste ee39 on your tag and move it to the right a little it - duplicate it and move one below the frame - with your eraser tool erase and the bottom girl selected erase the part of the girl that shows below the frame - go back to the top girl and erase what is on top of the frame(i didnt erase the hands)

Resize ee38 to 226 x 171 and paste on your tag - move to the bottom left and add a drop shadow - move below the top girl(above the frame) - resize ee29 to 152 x 152 and paste on your tag - move to the bottom right and add a drop shadow - resize ee3 to 210 x 210 and paste on your tag - move to the top right and add a drop shadow - resize ee20 to 500 x 320 - image / free rotate / to the right by 90 degrees - and paste on your tag

Add your name and copyright and your done
Wednesday, August 17, 2011

Emolicious

 
This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written august 17th, 2011

Supplies Needed
Closeup tube
Scrap kit - Emolicious by Tammy Kat - you can buy HERE

Scrap Kit Supplies
spikeframe2
tk-emolicious-heart1
tk-emolicious-textpaper
tk-emolicious-emoword
tk-emolicious-ribbontrim
tk-emolicious-skull1

Lets Get Started
Open a new 500 x 500 transparent image  - resize spikeframe2 to 430 x 429 and paste on your tag - paste textpaper on your tag and move below the frame - with the magic wand and the frame layer selected click the center of the frame - selections / modify / expand by 5 / selections / invert - go back to the paper layer and hit delete on your keyboard - paste the close up tube on your tag and move below the frame - arrange it to your liking - with the magic wand and the frame layer selected click the center of the frame - selections / modify / expand by 5 / selections / invert - go back to tube layer and hit delete - change the blend of the tube to hard light

resize heart1 to 418 x 500 and paste on your tag - move below the frame and tube layer - resize emoword to 500 x 158 and paste on your tag - move to the bottom of the frame - add a drop shadow -  resize ribbontrim to 500 x 83 and paste on your tag - move to the bottom of emoword (see mine for reference) - add a drop shadow - resize skull1 to 200 x 159 and paste on your tag - move to the top left of your tag - add a drop shadow

Add your name and copyright and your done
Monday, August 15, 2011

Finding Neverland Blog Train


Click the preview for Download



Saturday, August 13, 2011

Punk Lives

This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written August 3rd, 2011

Supplies Needed
Tube of choice (with closeup)
Scrap kit - Abbey Dawn by Scraps With Attitude which you can buy HERE

Scrap Kit Supplies
SWA_AbbeyDawnPaper1
SWA_AbbeyDawn39
SWA_AbbeyDawn43
SWA_AbbeyDawn72
SWA_AbbeyDawn77a
SWA_AbbeyDawn87
SWA_AbbeyDawn90
Lets Get Started
Open a new 500 x 500 transparent image - resize abbeydawn43 to 500 x 500 and paste on your tag - paste paper1 on your tag and move below the frame - go back to your frame layer and with your magic wand hit the center of the frame - selections / modify / expand by 4 / selections / invert - go back to the paper layer and hit delete on your keyboard - paste the tube closeup and move it below the frame - selections / modify / sexpand by 4 / selections / invert - go back to the tube layer and hit delete on your keyboard - change the blend of the tube to hard light

Paste AbbeyDawn72 to 500 x 500 and paste on your tag - arrange / send to bottom - paste the regular sized tube on your tag - duplicate it and move one below the frame - with your eraser tool erase and the bottom tube selected erase the extra tube showing under the frame at the bottom - go to the top tube and with eraser tool erase the tube that is showing on the bottom part of the frame 

Resize abbeydawn 39 to 150 x 150 and paste on your tag - move to the top left corner and move it below the tube - add a drop shadow - resize abbeydawn90 to 143 x 300 and paste on your tag - move it to the bottom left side and add a curve to it - move it below the the top tube layer and add a drop shadow - paste abbeydawn77a on your tag and move to the bottom of your tag - resize abbeydawn87 to 169 x 200 and paste on your tag - move it to the bottom right of your tag so that its on the wordart a little - add a drop shadow 

Add your name and copyright - and your done
Friday, August 5, 2011

Emo Cutie

 
This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written august 5th, 2011

Supplies Needed
Scrap kit - Emo Cutie by Crystals Creations - Find her blog HERE
You can buy the kit HERE
 
Scrap Kit Supplies
ecp8
emo cutie33
emo cutie32
emo cutie23
emo cutie14
emo cutie8
emo cutie3
 
Lets Get Started
Open a new 500 x 500 transparent image - resize emo cutie32 to 442 x 450 and paste on your tag - paste ecp8 on your tag and move below the frame - go to the frame layer and with your magic wand click the center of the frame - selections / modify / expand by 8 / selections / invert - go back to the paper layer and hit delete on your keyboard

Paste emo cutie 3 on your tag(above the frame) - resize emo cutie 23 to 286 x 475 and paste on your tag - resize emo cute 8 to 500 x 146 and paste on your tag - move to the bottom of your tag - resize emo cutie33 to 200 x 160 and paste on your tag - move to the bottom left of your tag - resize emo cutie 14 to 206 x 250 and paste on your tag - move to the bottom right of your tag - duplicate it and move one below the emo cutie girl - no select the top bear and with your eraser tool erase the parts of the bear that are on top of the girl

Add your name and copyright - and your done
 
Another tag with this scrap kit
Monday, August 1, 2011

Sovereign Heart Blog Train


Click the preview for the download
Alpha has 4 different colors for each letter



Wednesday, July 27, 2011

Rock



This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 27th, 2011

Supplies Needed
Scrap kit - iROCK by Pimp'd Designz which which you can buy HERE 
Scrap Kit Supplies
pd-rock-girl
 pd-rock-boy
pd-pp-04
pd-pp-01
pd-skull-02
pd-print-01
pd-star
pd-note-02
pd-guitar

Lets Get Started
Open a new 600 x 250 transparent image - paste pd-pp-04 on your tag - use both pd-rock girl and rock boy and arrange them on your tag so they fill the whole space - merge the rock boy and girl layers together and change the blend mode to overlay - paste pd-pp-01 on your tag and change the blend to burn - paste pd-print-01 on your tag

Paste pd-star on your tag and add a drop shadow - paste pd-guitar on your tag and move below the star - move it to the left of the star and add a curve to it - paste pd-note-02 on your tag and move below the star - move to the right side of your tag and add a curve the other way - resize pd-skull-02 to 262 x 240 and paste on your tag - add a new raster - selections / select all / selections /modify / select selection borders / settings at inside, anti-alias checked, and the border width set to 4 - fill with a dark color from your tag - adjust / add/remove noise / add noise and choose your settings - redo that border step but this time change the border to 6 - flood fill with white and add no noise


Avatar
paste pd-pp-04 on your avatar - go on the banner and copy and paste the rock girl and boy layer on your avatar - paste pd-pp-01 on your avatar and change the blend to burn - resize pd-skull-02 to 200 x 183 and paste on your avatar - move to the right side of the avatar so that half the skull is visible - add a new raster - selections / select all / selections / modify / select selections borders / set the border to 2 and fill with the same color as the banner - add noise with the same settings as before - redo the border step but this time change the border to 4 and flood fill with white but dont add noise

Add your name and copyright - and your done
Tuesday, July 26, 2011

Fish in the Sea

This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 26th, 2011

Supplies Needed
Tube of choice (with closeup)
Scrap kit - Any Fish in There by Heaven Designs which you can buy HERE

Scrap Kit Supplies
HD_any_fish_in_there_ele_tags_33
HD_any_fish_in_there_ele_tags_78
HD_any_fish_in_there_ele_tags_80
HD_any_fish_in_there_ele_tags_89
HD_any_fish_in_there_ele_tags_90
HD_any_fish_in_there_paper_tags_18

Lets Get Started
Open a new 500 x 500 image - resize element 78 to 450 x 448 and paste on your tag - paste paper 18 on your tag and move below the frame - with your magic wand go back to the frame layer and hit the center of the frame - selections / modify / expand by 5 / selections / invert - go back to the paper layer and hit delete on your keyboard - paste the close up tube on your tag - with your magic wand go back to the frame layer and hit the center of the frame - selections / modify / expand by 5 / selections / invert - go back to the tube layer and hit delete on your keyboard - change the blend of the tube to overlay
 Paste the regular sized tube on your tag - resize element 89 to 500 x 327 and paste on your tag - change the blend to screen - resize element 90 to 500 x 322 and paste on your tag - change the blend to screen - resize element 33 to 300 x 187 and paste on your tag - move to the top right of your tag - resize element 80 to 200 x 171 and paste on your tag - move it slightly down and to the right(not by much though) - go back through and add a drop shadow to the dolphin, turtle, frame, tube, and frame
Add your name and copyright - and your done
Friday, July 22, 2011

Chains and Whips


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 22th, 2011

Supplies Needed
Tube of choice(with a close-up)
Scrap kit - S&M by Tammys Scraps which which you can buy HERE
 
Scrap Kit Supplies
S&M Element 21
S&M Element 26
S&M Element 55
S&M Element 64
S&M Element 71
S&M Element 84
S&M Element 96
S&M Paper 5
S&M Paper 17

Lets Get Started
Open a new 500 x 500 transparent image - resize element 96 to 500 x 500 and paste on your tag - paste both paper 5 and paper 17 on your tag 0 move them both below the frame with paper 5 on top of paper 17 - with your magic wand and the frame layer selected hit the center of the frame - selections / modify / expand by 2 / selections / invert - go to each paper layer and hit delete on your keyboard - change the blend of paper 5 to overlay - paste the close up tube and move below the frame - selections / modify / expand by 2 / selections / invert - go back to the tube layer and hit delete on your keyboard - change the blend of the tube layer to hard light - paste element 21 on your tag and move below the close up tube layer

 Resize element 55 to 246 x 250 and paste on  your tag - move it to the bottom left of your tag and add a slight curve to it and a drop shadow - resize element 26 to 475 x 347 and paste on your tag - add a drop shadow to element 26 - resize element 84 to 200 x 93 - paste on your tag and move to the top right of your tag - add a drop shadow to element 84 - Paste the regular sized tube on your tag and leave it centered - resize element 64 to 280 x 179 and paste on your tag - move to the bottom right side of your tag - add a drop shadow - resize element 71 to 200 x 500 - change your foreground to element 71 and flood fill it on your tag

Add your name and copyright - and your done
Wednesday, July 20, 2011

Skullz Rock


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 20th, 2011

Supplies Needed
Tube of choice

Scrap kit - Rock Skulls by KittzKreationz which you can get on her blog HERE

Scrap Kit Supplies
0011
00p5
00336
wordart
030
skull bow
002

Lets Get Started
Open a new 500 x 500 image - resize 0011 to 500 x 500 and paste on your tag - paste 00p5 on your tag and move below the frame - with your magic wand and the frame selected hit the center of the frame - selections / modify / expand by 5 / selections / invert - go back to the paper layer and hit delete on your keyboard - paste the tube on your tag - duplicate it and move one below the frame - with the bottom tube selected erase the legs that show under the frame - go to the top tube and erase the bottom half of the tube that is on the frame - add a drop shadow to the bottom tube


resize 00336 to 386 x 500 and paste on your tag and add a drop shadow - resize wordart to 500 x 246 and paste on your tag and add a drop shadow - resize 030 to 200 x 200 and paste on your tag - move to the bottom right of your tag - resize skull bow to 200 x 158 - move to the middle left on your tag over the wordart - resize 002 to 312 x 196 and paste on your tag - move the bottom left side of your tag under the skull


Add your name and copyright - and your done
Tuesday, July 19, 2011

Flattery

 
This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 19th, 2011

Supplies Needed
Tube of choice(preferably laying down)
Scrap kit - Flattery by Designs by Sarah which you can buy HERE

Scrap Kit Supplies
sb_pmt_flattery_splatter1
sb_pmt_flattery_skull2
sb_pmt_flattery_pp8
sb_pmt_flattery_label
sb_pmt_flattery_frame5
sb_pmt_flattery_flower4

Lets Get Started
Open a new 500 x 450 image - resize frame5 to 443 x 520 and paste on your tag - paste pp8 on your tag and move below the frame - with the magic wand and the frame layer selected hit the center of the frame - selections / modify / expand by 7 / selections / invert / go back to the paper layer and hit delete on your keyboard 
 
Resize label to 400 x 150 and paste on your tag - move down to the bottom half of the frame and add a slight curve to it - resize skull2 to 200 x 158 and paste on your tag - move to the top right of your tag and add a slight curve to it - resize flower4 to 200 x 153 and paste on your tag - move to the middle left of your tag 

Paste the tube on your tag - move it to the bottom of the frame and label - resize splatter to 302 x 450 - image / free rotate / by 90 degrees to the right - paste on your tag and keep it centered

Add your name and copyright - and your done
Wednesday, July 13, 2011

Spider Girl


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 13th, 2011

Supplies Needed
Tube of choice(with closeup)
Scrap kit - Spider_Girl by Toxic Desirez which you can buy HERE
Font of choice - im using Spider bite which you can get HERE
Scrap Kit Supplies
Kristin - Spider Girl - frame 1
Kristin - Spider Girl - City Scene
Kristin - Spider Girl - Paper 21
Kristin - Spider Girl - Paper 19
Kristin - Spider Girl - Splatter
Kristin - Spider Girl - Sparkles
Kristin - Spider Girl - Wordart


Lets Get Started
Open a new 500 x 500 image - resize frame 1 to 490 x 483 and paste on your tag - paste paper 21 on your tag and move below the frame - go to the frame layer and with your magic wand hit the center of the frame - selections / modify / expand by 5 / selections / invert - go back to the paper layer and hit delete on your keyboard - paste paper 19 on your tag and move below the frame but above the other paper - follow the same step as you did to get rid of the extra paper outside of the frame from paper 21


Paste the close up tube on your tag and arrange below the frame so that it fits the whole space - if theres multiple tube layers merge them together - go to the frame layer and with your magic wand hit the center of the frame - selections / modify / expand by 5 / selections / invert - go back to the tube layer and hit delete on your keyboard 

Resize splatter to 383 x 500 and paste on your tag above the frame - resize wordart to 475 x 407 and paste on your tag - resize skyline to 400 x 127 and paste on your tag and move to the bottom of the frame - paste the tube on your tag - duplicate it and move one below the skyline - with your eraser erase the left shoe of the tube above the skyline so that it looks like its below the skyline - resize sparkles to 203 x 500 - free rotate by 90 to the right - change your forground to the sparkles and flood fill that on a new layer - go back through and add a drop shadow to the bottom tube, frame, and skyline


add your name and copyright - and your done
Tuesday, July 12, 2011

Spider Woman


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 12th, 2011

Supplies Needed
Tube of choice(with closeup)
Scrap kit - Comic-Girl by
Pimp'd Designz which you can buy HERE
Font of choice - im using Spider bite which you can get HERE
Scrap Kit Supplies
pd-frame-03
pd-splatter-03
pd-spider-web
pd-skyline
pd-pp-02

Lets Get Started
open a new 500 x 500 image - resize frame-03 to 550 x 534 and paste on your tag - paste pp-02 on your tag and move below the frame - with your magic wand selected go back to the frame layer and hit the center of the frame - selections / modify / expand by 26 / selections / invert - go to the paper layer and hit delete on your keyboard - paste the close up tube on your tag and move below the frame - duplicate it and arrange it so that it fills up the whole frame - follow the same step as the paper to get rid of the extra tube outside of the frame 

Resize skyline to 420 x 188 and paste on your tag - layers / arrange / send to bottom - move the skyline to the top of your tag - resize splatter to 486 x 500 and paste on your tag(above the frame) - resize spider-web to 299 x 300 and paste on your tag - move it to the bottom left of your tag and add a white drop shadow to it so it stands out more - Paste the regular sized tube on your tag - duplicate it and change the blend mode of the top tube to hard light - merge both tube layers together - go back though and add a drop shadow to the tube - skyline and your name
Add your name and copyright and your done
Sunday, July 10, 2011

Atomic Punk


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 10th, 2011

Supplies Needed
Tube of choice(with closeup)
Scrap kit - Atomic Punk by Crystal Creations which you can find HERE
Scrap Kit Supplies
appp11
apee2
apee6
apee10
apee22
apee24
apee32

Lets Get Started
open a new 500 x 500 image - resize apee32 to 450 x 450 and paste on your tag - paste appp11 on your tag and move below the frame - go back to the frame layer and with your magic wand  hit the center of the frame - selections / modify / expand by 5 / selections / invert - go back to the paper layer and hit delete on your keyboard - paste the tube closeup on your tag and move it below the frame but above the paper - duplicate it and arrange it so it fits the whole frame - merge all of the tube layers together - follow the same step as you did to get rid of the extra paper - change the blend mode of the tube layer to screen

Resize apee2 to 500 x 491 and paste on your tag - move below the frame but above the tube layer - change the blend mode of apee2 to overlay - paste the regular sized tube on your tag and leave it centered - resize apee24 to 483 x 86 and paste on your tag - move it to the lower half of the frame but with room for your name 

Resize apee22 to 235 x 141 and paste on your tag - move it to the top left of your tag - resize apee6 to 280 x 245 and paste on your tag move it to the bottom right side of your tag and turn it slightly - resize apee10 to 205 x 498 and paste on your tag - go back through and a drop shadow to the tube, apee6 apee22, apee24 and apee32

Add your name and copyright - thanks for trying

Another tag with this kit


Thursday, July 7, 2011

Splish Splash

 
This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 7th, 2011

Supplies Needed

Tube of choice(with closeup and preferably laying down)
Scrap kit - Splish Splash Splosh which you can find HERE
 
Scrap Kit Supplies
TW-SSS-frame3
TW-SSS-paper8
TW-SSS-paper16
TW-SSS-fish2
TW-SSS-bubbles
TW-SSS-wave2
TW-SSS-crab
TW-SSS-splash
TW-SSS-splish
 
Lets Get Started
Open a new 550 x 500 image - resize frame3 to 500 x 419 - image / free rotate / to the right by 90 degrees - paste the frame on your tag - paste paper 8 on your tag and move below the frame - with your magic wand and the frame layer selected hit the center - selections / modify / expand by 2 / selections / invert - go back to the paper layer and hit delete on your keyboard - paste paper 16 on your tag and move below the frame but above paper 8 - follow the same step as before to remove the extra paper that we dont need - change the blend mode of paper 16 to overlay - paste the close up of the tube on your tag and arrange it in the frame - move it below the frame - selections / modify / expand by 2 / selections / invert - go back to the tube layer and hit delete on your keyboard
 
Resize wave2 to 500 x 198 - paste on your tag and move below the frame - arrange at the bottom of the frame - with the eraser erase all the extra wave that lies outside of the frame - resize bubbles to 500 x 171 - images / free rotate / to the right by 90 degrees - paste the bubbles on your tag and move it to the top of your tag -  resize fish2 to 200 x 200 and paste on your tag - move it middle right of your tag - resize crab to 200 x 168 and paste on your tag - move it to the top left corner of your tag

Resize splish to 200 x 89 and paste on your tag - rotate it by a little - resize splash to 200 x 84 and paste on your tag - move it below splish and try to rotate it the same amount you did for splish - merge splish and splash together - add a drop shadow - now if your tube is laying down paste it on your tag and move it to the bottom of your tag - go back through and add a drop shadow to the frame, tube, wave, crab, fish, and the bubbles

Add your name and copright - and your done
Wednesday, July 6, 2011

Rocker


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions
Tutorial written July 6th, 2011

Supplies Needed

Tube of choice(with closeup)
Scrap kit - Skullz Rock by Crystals Creations - Find her blog HERE
You can buy the kit HERE
 
 Scrap Kit Supplies
Frame1
paper4
paper7
sparkles
wire
splot1
scatterdnotes

Lets Get Started
Open a new 550 x 500 image - resize frame1 to 500 x 390 and past on your tag - paste paper4 on your tag and move below the frame - with your magic wand and the frame layer selected hit the center of both frames - selections / modify / expand by 6 / selections / invert and go to the paper layer and hit delete on your keyboard - paste paper7 on your tag and move below the frame but above paper4 and follow the same steps as the last paper - change the blend of paper7 to hard light

Paste the tube close up on your tag and arrange it to your liking in one of the frames - redo that step with the other frame - with your magic wand go to the frame layer and hit the center of both frames - selections / modify / expand by 6 / selections / invert - go back to each tube layer and hit delete on your keyboard - if not below the frame move both tube layers below it but on top of both papers - change the blend of the tube layers to screen

Paste wire on your tag and move it below both papers so its the last layer - paste scatterdnotes on your tag and leave it centered(above the frame) - change the blend of the notes to overlay - paste full body tube(or what the tube offers) on your tag and keep it in the middle between the two frames - resize sparkles and paste on your tag and move it above the tube layer(if not already) - resize splot1 to 147 x 200 and paste on your tag - move splot1 to the top left of the frame - duplicate splot1 - image / mirror / image / flip 

Add your name and copyright - and your done
Friday, July 1, 2011

Catch a Wave


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions

Supplies Needed
Tube of choice(with closeup)
Scrap kit - Catch a Wave by designs by sarah which you can get HERE
Alpha - Catch a Wave by Rieka Rafita which you can get HERE

Scrap Kit Supplies
dbs_GI_July_dolphin
dbs_GI_July_frame 2
dbs_GI_July_pp3
dbs_GI_July_pp4
dbs_GI_July_seahorse
dbs_GI_July_waves1
Lets Get Started 
 Open a new 500 x 500 image and paste dbs_GI_July_frame 2 on your tag - paste dbs_GI_July_pp4 on your tag and move below the frame - paste dbs_GI_July_pp3 on your tag and move below the frame but above paper 4 - change the blend of paper 3 to burn - go to the frame layer and with your magic wand hit the center / selections /modify / expand by 2 / go back to selections / invert - go to each paper layer and hit delete on your keyboard
 Paste your close up on your tag and duplicate it - move one of the tube layers below the frame and keep the other above it - duplicate each tube so that you have 2 on top of the frame and 2 below it - change the blend of both the top tubes to hard light - merge the tubes together so that you again have 1 on top of the frame and 1 below the frame - close the view of the tube above the frame and with the bottom tube selected erase what you can see below the frame - open the view of the top tube again and erase what you can see above the frame - (as much as you want, i left 1 breast showing on top of the frame)
Resize the seahorse to 147 x 295 - paste on your tag and move to the left side of the frame - resize waves1 to 417 x 244 - paste on your tag and move to the bottom of the frame - resize dolphin to 244 x 205 - paste on your tag and move to the bottom right corner(we can move it later once we get the alpha on)

Open the following letters from the alpha - C A T H W V E - resize all of the letters to 12% and paste them on your tag so they spell catch a wave - you can place them however you wish - go back through and add a drop shadow to the alpha, frame, seahorse, waves, dolphin, and the tube below the frame

Add your name and copyright and your done - thanks for trying my tutorial

Under the Sea


This tutorial was written by me
Any tutorial similar is highly coincidental
This tutorial was written for those who have basic knowledge of psp
 This tutorial was written in pspx2 but can work in other versions

Supplies Needed
Tube of choice(with closeup)
Scrap kit - Under the Sea by Pimp'd Designz which you can buy HERE
 Mask which you can get HERE

Scrap Kit Supplies
PD-net-01
PD-bubbles-02
PD-fish-02
PD-frame-02
PD-pp-03
PD-pp-04
PD-pp-07
PD-pp-08

Lets Get Started
Open an new 500 x 500 image - Paste PD-pp-07 on your tag - layers / new mask layer / from image / and in the drop down menu choose Becky_Mask023 and click ok - Paste PD-pp-08 on your tag and move it into the mask and on top of the PD-pp-07 - change the blend of paper 8 to burn - Paste PD-net-01 on to your tag and move it into the mask on top of both papers - change the blend of the net to screen and lower the opacity to 68 - merge the mask layer

Resize PD-frame-02 to 400 x 280(to do this you will need to check the advanced settings and uncheck Maintain original print size) - paste on your tag and move to the bottom left - Paste PD-pp-04 on your tag - go to the frame layer and with your magic wand hit the center / selections /modify / expand by 2 / go back to selections / invert - go to the paper layer and hit delete on your keyboard and move the paper below your frame - Paste PD-pp-03 and do the same as paper 4 - change the blend mode of paper 3 to overlay

Paste the close up of your tube on your tag and move it inside the frame - go to the frame layer and with your magic wand hit the center / selections /modify / expand by 2 / go back to selections / invert - go to the tube layer and hit delete on your keyboard and move the tube below your frame 

Paste the Tube(non close up) on your tag and move it on top of the frame but filling up the whole tag - resize PD-fish-02 to 200 x 147 and past on your tag - move it to the top right of the frame and move the fish below the tube layer - Resize PD-bubbles-02 to 213 x 48 and paste on your tag and move it on top of the body of the tube - go back though and add a drop shadow to the fish, bubbles, frame and your tube

Add your name and copyright - and you have finished my tutorial

Chat with Me

Popular Posts

Total Pageviews